Faculty and Research Laboratories
Research Laboratories
and Subjects
Result
Shown
All
-
Furukawa Research Group (Biomedical Engineering Research Group)Detailed Site
Let's challenge the limits of organ regeneration!
We are challenging physical stimulation devices, nano/micro stereolithography, and non-invasive spectroscopic methods for tissue regeneration ! -
Shino-Yoshitake Research GroupDetailed Site
Well-Being & Life Science and Assistive Technology
We focus on mobility, usability and codesign of human in the loop systems, and design solutions with human-machine interaction to appropriate HMI. -
Momozono Research Group (NSK Tribology Collaborative Research Cluster)Detailed Site
Contributing to SDGs through tribological research
Contribute to the SDGs, such as reducing energy losses, through research in the interdisciplinary field of tribology (friction, wear and lubrication). -
Araki Research GroupDetailed Site
For higher performance and safety of next-generation solid-state ionics devices
We are studying ceramics used for ionics devices such as all-solid-state batteries and fuel cells from both perspecteives of solid mechanics and solid-state ionics. -
Yoshimura LaboratoryDetailed Site
Toward decode, visualize, and enhance the brain
We are working on neural decoding to visualize brain information and develop human interfaces, aiming at scientific and engineering contribution. -
Takahashi Research GroupDetailed Site
Toward Smart Agriculture and Forestry Engineering
For smart agriculture and forestry, we are researching on sensing, robot, utilization of unused resources and zero carbon energy technologies, etc. -
Maeda Research GroupDetailed Site
Designing smart materials and creating robots
We design smart materials to create innovative robots and devices. We focus on the dynamic properties of gels, polymers, and fluids. -
Yamaura Research GroupDetailed Site
Elucidate dynamics of machinary for nobel machines
Through the establishment of theoretical analysis methods for the dynamics of machinary, we promote the development of machine capabilities. -
Mizutani Research GroupDetailed Site
Developing new technologies enable to use machines and structures safely and securely in long term
Researches about new NDT / signal processing / condition monitoring / AI for structural integrity evaluation / fracture control and remaining life evaluation methods -
Miura Research GroupDetailed Site
AI/robot using human bio-signal
We are researching the human-machine cooperative systems by development of AI and robot technologies using human biological information. -
Kikura Research GroupDetailed Site
Nuclear Thermal Hydraulics and Revitalizics
We are researching on improvement / advancement of nuclear reactor safety, remote sensing, ultrasonic measurement, Revitalizics and renewable energy. -
Yanagida Research GroupDetailed Site
BioMEMS, Biosensing, Biofunctional engineering
Our group contribute to the development of health and environmental science using MEMS technology. -
Tomohisa Tanaka Research GroupDetailed Site
Innovative production technology based on theoretical consideration
Production and processing technology is main topic of this Lab. We are researching new processing technologies using laser and ultrasound vibration. -
Onishi Research GroupDetailed Site
Computer Science for environmental turbulent flows
R&D of integrated technologies of simulation and data sciences for environmental multi-phase turbulence -
Takayama Research Group
Let's develop unexisting devices. Impossible? OK. Let's develop devices to develop them.
Our interest is in mechanism of mobile robots, robot hands, and medical devices. In recent years, we also started to develop microfluidic devices. -
Kobayashi-Matsuura Research Group (JTEKT and TokyoTech Joint Research Laboratory for Innovative Generic Technology)Detailed Site
Pursuing the innovation of machine elements
Development of analysis, design and manufacturing technology of innovative machine elements is ongoing to realize extraordinary mechanisms. -
Nakamura-Endo Research Group (YASKAWA-TokyoTech Collaborative Research Chair)Detailed Site
Lightweight actuators for collaborative robots
YASKAWA-TokyoTech Collaborative Research Chair, which belongs to several Departments and Schools. Mechatronics Laboratory. -
Kadonaga-Kato Research Group (RICOH Collaborative Research Program on Advanced Digital Printing Technology)Detailed Site
Target is complicated phenomena of ink fixing.
Our laboratory is established in 2019 on Collaborative Research Program with Tokyo Tech and Ricoh. Target is evaporation/penetration/fixing of ink. -
Nakanishi Research GroupDetailed Site
Advanced robotics for space development
Our research theme is space robotics technology for future space development. We challenge to realize new space system with fusion of "orbital servicing," "space locomotion," and "nano-satellite" technologies. -
Nishida Research GroupDetailed Site
Living centric design in the centenarian era
The centenarian era needs technology to adapt to human cognitive and physical change. We are working on "living centric design" based on AI and IoT. -
Fushinobu Research GroupDetailed Site
Next step in energy utilization from ME department
For the next paradigm shift in effective energy utilization research - fuel cell and energy conversion devices, electronics, and optical applications -
Kim Research GroupDetailed Site
Micro hydraulic power opens up micro world.
To develop and fabricate new types of micro actuators and sensors by utilizing electro-conjugated fluids (ECF) and MEMS fabrication technology. -
Kondo Research GroupDetailed Site
Development of liquid-metal based innovative energy complex
We are studing novel technologies on liquid metal coolants of innovative nuclear reactors for the sustainable development of the world. -
Inaba Research GroupDetailed Site
Design innovative machines by mechanical modeling
We design various scale machines and structures from viewpoints of mechanics and material sciences; eg. flat panel display, automobile, power plant. -
Nisisako Research GroupDetailed Site
Frontier of nano/microfluidics and interface science
Our group studies micro/nanofluidics and interface science to develop new bio-analytical methods and novel functional materials. -
Shigeki Saito Research GroupDetailed Site
Design by physcis, biomimetics, or human insight
Our ultimate goal is to deliver our fundamental engineering knowledge to the society by developing bio-inspired funcational materials and the method of human-centered engineering design. -
Yoshida Research GroupDetailed Site
Applied Brain Science for the Engineering
Based on the brain science, our lab will lead to a productive and lasting marriage between user experience science and mechanical engineering. -
Hatsuzawa Research GroupDetailed Site
Device Innovation by MEMS and Bio Technology
Scope of Research ; development of MEMS tools and devices for biochemistry and bio measurements, nmicro and nano fabrication technology by biotechnology. -
Suzumori-Endo Research Group
Developing Actuators and Creating Robots
To realize novel robots and mechatronics, we are working widely from component development, system integration to field applications. -
Nozaki Research GroupDetailed Site
Towards a decarbonizing and sustainable society
Research on electron-driven catalysts using non-equilibrium plasma: carbon recycling, catalyst development, in situ/operando measurement. -
Suekane Research GroupDetailed Site
Mitigation of global warming with stable supply of resources
We develop CCS and EOR technologies studying on multiphase flow in porous media by the combination of micro-X-ray tomography and numerical simulations. -
Hirata-Aono Research Group
Toward Highly-Functional Advanced Surfaces
Surface is required to have multi-functions. Our research focuses on development of highly functional surfaces on the basis of nanoscale phenomena. -
Hirai-Sasabe Research GroupDetailed Site
Challenge to energy and environmental problems by the cutting-edge measurement and analysis
Wide-ranging research topics which make substantial contributions to high-efficient use of clean energy and reduction of CO2 emission -
Takeda-Sugahara Research GroupDetailed Site
Design Technology for Robots and Assistive Devices
We are working on design methodology for robots and assistive devices that can support human life and society. -
Hiroto Tanaka Research GroupDetailed Site
Biomimetic aerial and underwater micro robots
We seek to understand biomechanics of flying and swimming animals such as hummingbirds and penguins aiming to create biomimetics robots by means of advanced micro fabrication technology. -
Tanahashi-Shimura Research GroupDetailed Site
Revealing physics of turbulence and combustion.
Turbulence and combustion, which are important for reducing environmental impacts of engineering applications, are investigated by cutting-edge tools. -
Hasegawa Research GroupDetailed Site
Exploring the frontiers of high energy density science with quantum beams
We explore technologies on the generation and utilization of quantum beams (laser, ion beam, and cluster beam), aiming for application to energy field. -
Tadano Research GroupDetailed Site
Create mechanical systems supporting humans
We are studying mainly surgical robot systems and tele-operation aiming to realize effective human support and advanced man-machine interaction. -
Okuma-Sakamoto Research Group
Aiming for ultimate design methodology of structural dynamics
The Structural Dynamics Design Laboratory (SDDL) is involved mainly in three areas of research: (i) structural dynamics, (ii) acoustics, and (iii) space systems. The objective of the Laboratory is to explore innovative mechanical designs through investigations of dynamical systems and to train young engineers who will lead this field in the future. -
Murakami Research GroupDetailed Site
Energy Materials/Systems for Carbon Neutralization
We are enjoyably conducting energy-related R&Ds in the Keywords to realize carbon neutralization. Your questions and visiting us are highly welcomed. -
Aoki Research GroupDetailed Site
Large-scale CFD applications on GPU supercomputers
There are a lot of unknowns in fluid phenomena such as gas-liquid two-phase flows. We solve them on high-end supercomputers by using GPU computing. -
Shinshi Research Group
Precision and Medical Devices Innovation
Realization of innovative medical and precision devices such artificial hearts and micro-motion mechanisms using micro-nano mechatronics technology. -
Xiao Research GroupDetailed Site
Understanding fluid dynamics by computer simulations
We are currently interested in the advanced topics in computational fluid dynamics and computational physics, including developing novel numerical schemes and models, as well as real-case applications. -
Matunaga-Chujo Research GroupDetailed Site
From Creation of Idea to Demonstration in Space
Matunaga-Chujo Lab's research focuses on innovative space systems and nano/small satellites: World's first CubeSat and highly advanced 50kg satellites. -
Omata-Ishida Research GroupDetailed Site
Creative medical and industrial Robotics/MEMS
Omata-Ishida Lab studies robotic grasping/manipulation and surgical robots. We also study microfluidic devices for cellular medical research. -
Kosaka Research GroupDetailed Site
Achievement of high efficiency engines
The complex combustion phenomena in engines are investigated by advanced laser diagnostics in order to achieve high efficiency engine systems. -
Yamazaki Research GroupDetailed Site
Joining of dissimillar material for space use
Laboratory of Joining in Mechanical Engineering is scare. Members use phase diagram and heat treatment of materials usually. -
Takushi Saito Research GroupDetailed Site
How can we use the limited energy in smart way?
We develop the measurement technique for transport phenomena, thermal energy transportation, and heat transfer control for materials processing. -
Todoroki Research GroupDetailed Site
Creation of multi-functional new composites
Composite structures of aerospace components and automobiles with self-diagnosis and energy storage functions are current research targets. -
Takahara-Nakano Research GroupDetailed Site
Elucidation of mechanism of vibration
Focusing on a mechanism of vibration, the various vibration phenomena, e.g., nonlinear sloshing and regenerative chatter, are investigated. -
Yoshino-Yamamoto Research GroupDetailed Site
Challenge biotechnology in the infinitesimally small world.
We are challenging developing innovative bio-nanotools and nanofabrication technologies to sense bionanoparticles for early detection of cancers, viral infections, etc. -
Yoshida Research GroupDetailed Site
Advanced microrobotics using functional fluids
For advanced power microrobots, we propose and develop new actuation systems using characteristics of functional fluids in electric/magnetic fields. -
Yoshioka Research GroupDetailed Site
Revolutional Ultraprecision Machining Technology
We focused on the research related with nano manufacturing, such as structure of mother machine, motion control, sensor-actuator, and CAD/CAM. -
Shinji Tanaka Research Group
Tribology makes "DANTOTSU" hydraulic components
We are working on tribological technologies to improve the performance of hydraulic components such as pump and motor for the consruction machinery. -
Iwatsuki Research GroupDetailed Site
Human friendly robotｓ and gentle sound environment
In order to improve human QOL, we aim to develop intelligent and flexible robots and comfortable sound environment giving available informations. -
Okada-Hijikata Research Group
Robot design, control and application
The purposes of our research are synthesis and control of robot systems. These technologies are applied to human motion instruction. -
Okamura Research GroupDetailed Site
R & D for Superconducting/cryogenic application
We are working on development of superconducting magnet cooling technology, cryogenic thermo-syphon, and room-temperature magnetic refrigerator. -
Okuno Research GroupDetailed Site
Application of MHD Flow to Energy and Aerospace
We are working on development of environment-friendly high efficient MHD electrical power generation and high perforce aerospace electric thruster. -
Inoue Research GroupDetailed Site
Heat Control -Nano to Macro & Cryogenic to High temperature -
The research field of our group is heat transfe and thermal engineering. Our current research subjects are heat pipes for aerospace engineering, thermal properties measurement in cryogenic temperature. -
Inoue-Sakaguchi Research GroupDetailed Site
Lifecycle management in mechanics of materials
We focus on various problems in mechanics of materials for strength design, maintenance and reliablity of materials and structures. -
Sato Research GroupDetailed Site
Environmental impact reduction in transportation system
In order to reduce the environmental impact from trasportation system, the emission from engine system and vehicle system are analyzed. -
Hanamura Research GroupDetailed Site
Energy conversion supported by nano-technology
Research and development of high efficiency power generation and reforming of fossil fuel for reduction of carbon dioxide. -
Yagi Research GroupDetailed Site
Interfacing technology at brain and neural level
Our goal is to study the neural mechanisms at cellular and behavioral/cognitive levels and apply its findings into biomedical engineering technology.
